MedCNCParts provides medical CNC turning of round parts to your drawing: instrument shafts and handles, fittings, valve and pump components, housings and sensor bodies. For device OEMs and contract manufacturers, from samples to repeat lots.
MedCNCParts, the medical division of DEK, turns round parts to your drawing on CNC lathes and turn-mill centers, under an ISO 13485 quality system, from engineering samples to repeat lots.
This is the route for larger diameters and shorter parts; long, slender parts go to Swiss turning for slender parts. The OEM owns design validation, ISO 10993 biological evaluation, sterilization validation and regulatory clearance.
Round parts for instruments, fluid connections and equipment, each made to your drawing; implant components as an additional capability.
Shafts, ferrules, knobs and surgical handles in stainless steel, titanium and PPSU.
Medical fittings and fluid connections, threaded adapters and ported bodies.
Valve and pump components, spacers and bushings for diagnostic and laboratory equipment.
Round housings and sensor bodies, with bores, grooves and sealing faces turned in one setup.
Additional capability, to OEM drawings: implant components such as hip joint components and dental implant abutments.
Electropolishing medical metals produces smooth, clean, corrosion-resistant surfaces, removing burrs and impurities to ensure biocompatibility, sterility, and reliable device performance.
MedCNCParts provides medical CNC parts with precision passivation, removing contaminants and restoring stainless steel’s oxide layer for corrosion-resistant, implant-ready components.
Precision electroplating for medical devices strengthens surfaces, maintains biocompatibility, and ensures clinical-grade, ISO-compliant, traceable finishes for implants and surgical instrumentation.
MedCNCParts provides precise, compliant laser marking and UDI on medical components, ensuring traceability, regulatory adherence, and long-lasting surface quality.
Anodizing components for medical use strengthens surface protection, cleanliness, and biocompatibility, ensuring durable, traceable, and implantable-grade finishes for precision-machined parts.
With MedCNCParts’ titanium coloring, medical devices gain validated biocompatibility, precise differentiation, and assured compliance with stringent implantable certification standards.
Biocompatible powder coating creates corrosion-resistant, uniform finishes on medical parts, maintaining micro-precision, cleanliness, and validation-ready surfaces for surgical devices.
MedCNCParts offers precise, fast-turnaround CNC machining titanium with implant-grade quality, ultra-clean operations, and reliable small-batch medical part production.
MedCNCParts’ machining services deliver precision-shaped components with refined finish, durability, and consistent optical performance for healthcare use.
MedCNCParts offers advanced CNC machining for medical components, producing stainless steel parts for surgical and implantable applications to exacting ISO tolerances with fast turnaround.
MedCNCParts’ CNC machining Copper ensures ISO 13485-certified cleanliness, precise tolerances, and consistent quality across surgical, diagnostic, and implantable copper components.
MedCNCParts focus on traceability, process compliance, and rapid-response production makes us a trusted partner.
MedCNCParts machines PEEK components using validated processes, micro-precision, and complete inspection for advanced medical devices.
MedCNCParts ensures consistent quality and fast turnaround for complex, small-batch medical applications.
| 316L / 316 stainless | 316LVM per ASTM F138 when called for; instrument parts, fittings, equipment parts |
| 17-4PH stainless | Condition stated per drawing; instrument shafts, mechanical parts |
| Titanium | Ti-6Al-4V; ELI per ASTM F136, CP Ti per ASTM F67 if called for; device, implant parts |
| PEEK | Machining grade; ASTM F2026 when called for; insulating and precision polymer parts |
| PPSU | Per drawing; sterilizable handles and device parts |
| Aluminum | 6061, 7075; equipment parts, round housings |
Edges, threads and cross holes deburred and cleaned.
Passivation, electropolishing or titanium anodizing per the callout.
Lot traceability on every shipment; CoC and material certificates on request.
FAI before production, report on request; critical dimensions checked.
Marked where the drawing calls for it.
Each process has limits, so the drawing decides the route. CNC turning and turn-mill suit larger diameters and short parts, with cross holes and flats by live tooling. Long, slender parts deflect away from the tool and go to Swiss-type turning.
Flats, pockets and multi-face features beyond live tooling go to CNC milling of prismatic parts. Shafts and pins whose diameter or roundness is tighter than turning holds are finished by cylindrical grinding of shafts and pins.
Operations cover OD and ID turning, boring, grooving, thread turning, cross-drilling, milled flats with live tooling, and parting. Turn-mill centers add milled features in the same setup.
Size range, tolerances and surface finish are confirmed per drawing; surface roughness is specified as Ra per ISO 21920-2 or ASME B46.1.
Critical diameters are turned in one setup where possible and checked at first article; the FAI report is available on request.
Drawings are read to ASME Y14.5, and tolerance-critical features are agreed at DFM review rather than quoted as one shop-wide figure. For background, see our guide to medical CNC turning.
Turned parts are deburred and cleaned at edges, threads and cross holes, then finished as the drawing calls out: passivation per ASTM A967, electropolishing, or titanium anodizing (AMS 2488 Type II). UDI or lot marking is added where the drawing calls for it.
Every shipment carries lot traceability; CoC, material certificates and the FAI report are available on request.
“We’re very satisfied with your quality and service. The CNC-turned orthopedic bone screws and dental implant abutments we received were precise, clean, and completely ready for assembly. Your team was quick to respond to our questions and provided helpful suggestions to improve manufacturability. The parts arrived on time, well-packaged, and exactly matched our drawings. It’s been a smooth and reliable experience working with you, and we’ll definitely continue collaborating on future medical projects.”
“I’m very happy with your professionalism and attention to detail. Every batch of CNC-turned stainless-steel surgical instrument handles and titanium pacemaker housing rings met our strict inspection standards and arrived exactly as scheduled. Your team is easy to communicate with, transparent about progress, and always proactive in solving challenges. We’re very satisfied with both the product quality and the overall service experience.”
We’ve worked with you on several medical machining projects, including endoscopic fittings and laparoscopic shaft adapters, and have been very satisfied every time. Communication is always fast and friendly, and deliveries are consistently on schedule. We’re very satisfied with your quality, speed, and professionalism.
Send your 3D model, 2D drawing, material and quantities; we confirm the documentation with the quote.
MedCNCParts manufactures components to customer specifications; it does not design or market medical devices.
The part rotates while a stationary tool removes material, producing round features such as diameters, bores and threads. Turn-mill centers add milled features in the same setup.
Long, slender parts are better on Swiss-type lathes, and prismatic parts on milling centers. We choose the process per drawing.
It depends on diameter, length, material and feature, so we confirm it on your drawing at DFM review.
Yes. 316L, 17-4PH, titanium and PEEK are in our material range, with material certificates on request and implant grades when the drawing calls for them.
Yes. Finishes are applied per the drawing's callout, so parts ship passivated, electropolished or anodized to your specification.
